Sardine (Sardina pilchardus) spawning seasonality in European waters of the northeast Atlantic

Egg data from ichthyoplankton monitoring sites in the western English Channel (1988–2003) and northern Spain (1990–2000) and macroscopic maturity data from biological samples of purse seine landings in western and southern Iberia (1980–2004) are used to describe the spawning seasonality of sardine (Sardina pilchardus) in European waters of the northeast Atlantic using generalised additive models. The fitted models reveal a double peak in spawning activity during early summer and autumn in the western Channel, a wider spring peak off northern Spain and a broad winter season in the western and southern Iberian Peninsula. At all sites, a high probability of spawning activity was observed over at least 3 months of the year, with the duration of the season increasing with both decreasing latitude and increasing fish size. Off western and southern Iberia there are indications that the spawning season has been of longer duration in recent years for all size classes (reaching in some cases 8 months of the year for large fish). These patterns are in general agreement with existing literature and theoretical expectations of sardine spawning being driven locally by the seasonal cycle of water temperature, assuming preferences for spawning at 14 –15°C and avoidance for temperatures below 12°C and above 16°C. Regional quotient plots indicated that spawning tolerance to higher temperatures increases progressively with decreasing latitude. Despite the weak evidence for geographical differences in temperature tolerance that may have some genetic origin, the degree of spatio-temporal overlap in sardine-spawning activity within Atlantic European waters is unlikely to promote any reproductive isolation in that area.     

Atmospheric versus biological sources of polycyclic aromatic hydrocarbons (PAHs) in a tropical rain forest environment

To distinguish between pyrogenic and biological sources of PAHs in a tropical rain forest near Manaus, Brazil, we determined the concentrations of 21 PAHs in leaves, bark, twigs, and stem wood of forest trees, dead wood, mineral topsoil, litter layer, air, and Nasutitermes termite nest compartments. Naphthalene (NAPH) was the most abundant PAH with concentrations of 35 ng m(-3) in air (>85% of the sum of 21PAHs concentration), up to 1000 microg kg(-1) in plants (>90%), 477 microg kg(-1) in litter (>90%), 32 microg kg(-1) in topsoil (>90%), and 160 microg kg(-1) (>55%) in termite nests. In plants, the concentrations of PAHs in general decreased in the order leaves > bark > twigs > stem wood. The concentrations of most low-molecular weight PAHs in leaves and bark were near equilibrium with air, but those of NAPH were up to 50 times higher. Thus, the atmosphere seemed to be the major source of all PAHs in plants except for NAPH. Additionally, phenanthrene (PHEN) had elevated concentrations in bark and twigs of Vismia cayennensis trees (12-60 microg kg(-1)), which might have produced PHEN. In the mineral soil, perylene (PERY) was more abundant than in the litter layer, probably because of in situ biological production. Nasutitermes nests had the highest concentrations of most PAHs in exterior compartments (on average 8 and 15 microg kg(-1) compared to <3 microg kg(-1) in interior parts) and high PERY concentrations in all compartments (12-86 microg kg(-1)), indicating an in situ production of PERY in the nests. Our results demonstrate that the deposition of pyrolytic PAHs from the atmosphere controls the concentrations of most PAHs. However, the occurrence of NAPH, PHEN, and PERY in plants, termite nests, and soils at elevated concentrations supports the assumption of their biological origin.     

Sustainability and education for sustainability: An analysis of publications from the last decade

This study analyzes the characteristics of publications on sustainability topics and education for sustainability in the Web of Science (WOS) database during the period ranging from 2005 to 2014. We identified the topics that are being studied within those subjects and other relevant topics. We also analyzed a special edition of the Journal of Cleaner Production on “Higher Education for Sustainable Development: Emerging areas,” published in January, 2014. Our approach was both qualitative and quantitative and aimed at qualifying and quantifying certain variables related to the scientific literature on the broad subject of sustainability. The number of published pieces in the WOS focusing on sustainability issues during the period from 2005 to 2014 was 5,924. In our analysis of the special edition of the Journal of Cleaner Production, we found and analyzed 17 abstracts and full papers. The main results of our survey highlight the education, educational research, environmental sciences, ecology, and engineering areas as including the greatest number of publications. Articles, as opposed to conference proceedings or reviews, accounted for 63% of the published documents, and the year 2013 showed the largest number of publications. Huisingh, Suciu, Katane, and Barth are the most published authors on these topics. Furthermore, management, environmental studies, ecology, and environmental sciences are the “hot topics” with the best search results, meaning articles of impact and high quality. Finally, it should be emphasized that publications on the subject of sustainability appear most often in the sciences.     

Somatic Coliphage Profiles of Produce and Environmental Samples from Farms in Northern México

Somatic coliphages were quantified in 459 produce and environmental samples from 11 farms in Northern Mexico to compare amounts of somatic coliphages among different types of fresh produce and environmental samples across the production steps on farms. Rinsates from cantaloupe melons, jalapeño peppers, tomatoes, and the hands of workers, soil, and water were collected during 2011–2012 at four successive steps on each farm, from the field before harvest through the packing facility, and assayed by FastPhage MPN Quanti-tray method. Cantaloupe farm samples contained more coliphages than jalapeño or tomato (p range <0.01–0.03). Across production steps, jalapeños had higher coliphage percentages before harvest than during packing (p = 0.03), while tomatoes had higher coliphage concentrations at packing than all preceding production steps (p range <0.01–0.02). These findings support the use of targeted produce-specific interventions at multiple points in the process of growing and packing produce to reduce the risk of enteric virus contamination and improve food safety during fruit and vegetable production.     

Assessment of geochemical modeling applications and research hot spots—a year in review

Environmental Geochemistry and Health - Geochemical modeling has been employed in several fields of science and engineering in recent years. This review seeks to provide an overview of case studies...     

Degradation and removal methods of antibiotics from aqueous matrices--a review

Over the past few years, antibiotics have been considered emerging pollutants due to their continuous input and persistence in the aquatic ecosystem even at low concentrations. They have been detected worldwide in environmental matrices, indicating their ineffective removal from water and wastewater using conventional treatment methods. To prevent this contamination, several processes to degrade/remove antibiotics have been studied. This review addresses the current state of knowledge concerning the input sources, occurrence and mainly the degradation and removal processes applied to a specific class of micropollutants, the antibiotics. In this paper, different remediation techniques were evaluated and compared, such as conventional techniques (biological processes, filtration, coagulation, flocculation and sedimentation), advanced oxidation processes (AOPs), adsorption, membrane processes and combined methods. In this study, it was found that ozonation, Fenton/photo-Fenton and semiconductor photocatalysis were the most tested methodologies. Combined processes seem to be the best solution for the treatment of effluents containing antibiotics, especially those using renewable energy and by-products materials.     

Morphological and statistical analysis of the impact of breakwaters under construction on a sand spit area (Douro River estuary)

The area of Cabedelo sand spit, located at the mouth of Douro River estuary (Porto, Portugal), reduced in recent decades. In order to study its evolution and also the impact of two breakwaters built to fix the river entrance, a dataset from 23 trimestral surveys using differential GPS techniques, conducted between 2001 and 2007, were considered. A time-series analysis and the estimation of relationships between Cabedelo spit area and several hydrodynamic parameters through statistical techniques were performed in order to determine which parameters have more influence in the Cabedelo spit behavior. From the time-series analysis a seasonal tendency is visible, with the lower values occurring in December and the higher values occurring in July. The estimation of a relationship between Cabedelo spit area and several independent variables reached better results when the dataset was divided in Part A (before the beginning of breakwaters construction) and Part B (during the breakwaters construction). An analysis of the morphological evolution of Cabedelo spit shoreline was also performed: (1) a simple analysis of retreat and accretion rates data with a geographical information system and (2) a more exhaustive analysis were performed using Empirical Orthogonal Functions (EOFs). The Cabedelo spit shoreline erosion occurs mostly on the West and North side, and the accretion mostly occurs in the area protected by the South breakwater. During the breakwater’s construction, the Cabedelo spit shoreline presented high retreat rates, with a mean value greater than 100 m. In terms of spatial variance (EOFs analysis), when the dataset was divided in two parts, the first Principal Component (PC) represents 60.10 % and 89.86 % of the mean squared value of the data, for Part A and Part B, respectively. As proved, the breakwaters would tend to stabilize the coastline leading to a higher first PC value after breakwaters construction (Part B).     

New aspect in seagrass acclimation: leaf mechanical properties vary spatially and seasonally in the temperate species Cymodocea nodosa Ucria (Ascherson)

Seagrasses may acclimate to environmental heterogeneity through phenotypic plasticity. In contrast to leaf morphology, which has been a central point in seagrass acclimation studies, plasticity in leaf biomechanics and fibre content is poorly understood, despite being crucial in plant ecological performance, especially regarding physical forces. We hypothesised that mechanical traits (e.g. breaking force, strength, toughness, and stiffness) and fibre content of seagrass leaves vary as morphology does under differential environments. Cymodocea nodosa was seasonally monitored at three locations around Cádiz Bay (southern Spain) with hydrodynamic regime as the most noticeable difference between them. Leaves showed plasticity in both morphology and mechanical traits, with wave-exposed individuals presenting short but extensible and tough leaves. Leaf fibre content was invariant along the year and with little spatial variability. Cross-sectional area rather than material properties or fibre content differentiates leaf mechanical resistance. Seagrass capacity to thrive under a range of mechanical forces may be dictated by their plasticity in morpho-biomechanical traits, a key element for the hydrodynamical performance and, hence, for species colonisation and distribution.